Warning Signs You Need To Replace Your Hot Water System

 

Water heaters are generally reliable, durable appliances that can last as long as 15 to 20 years if properly maintained. But like any machine that works constantly, your water heater will eventually break down and require replacement or repair. However, there are certain signs that you may need to replace your water heater sooner rather than later Keep reading to know more about the signs that indicate it’s time for a new hot water system.  

Low Pressure

This is often the most noticeable sign of something wrong with your water heater. When you turn on your faucet and no water comes out, this could be due to low pressure or insufficient water in the tank. Low pressure can happen for various reasons like an old or faulty cartridge in your faucet, which would need replacement, a clogged filter in your showerhead, air bubbles being injected into the system by a backflow preventer and more.

Discoloured or Smelly Water

Do you notice discoloured or smelly water coming from your faucet? This could be a sign that you need to replace your water heater. The filter might be clogged or there could be build-up of minerals like lime, scale, or rust. Whatever the cause, it's time for a new one!

Sudden Leaks

If your water heater starts leaking or the pilot light goes out unexpectedly, it could signal that you need to replace your water heater. Sometimes if these things happen all at once and continue without being fixed, you may need to call for an emergency plumber Sydney as there might be more serious issues with your heater.

Strange Noises Coming From the Unit

If you can hear strange noises coming from your water heater unit, this is usually a sign that there is something wrong with the system. Running water can sound like a buzzing noise or some other disturbance, which is typically caused by a gas leak. If the sound of running water ever stops, turn off the gas and call a 24 hour plumber Sydney to inspect the tank for leaks and damage.

Lack of Hot Water

If you have a gas water heater, then lack of hot water may just be due to your thermostat being set too low. If you have an electric model, it's possible that the thermostat isn't sensing that the water is ready yet. Sometimes corrosion can block or disrupt this sensor and make it hard for the controller to gauge how hot the water is. If none of these seem right, take notice of how long it takes for your tap water to reach the desired temperature.

Rusty or Discoloured Taps and Faucets

Rusty or discoloured taps and faucets indicate that the hot system is worn out and needs a replacement. This means the water heater may be corroding and leaking rust into the cold water line. If this is happening, contact a best plumber in Sydney right away.

Visible Damage to the Tank

Make sure you keep an eye on any cracks, leaks, or other problems with the tank itself and report them as soon as possible. If the water tanks starting to rust or suffer from scratches and scuffs, it's probably time for a replacement. This will help prevent mineral build-up in the tank which could lead to even more costly problems down the line!

Learn more about the most common signs you need to replace your water heater and what you can do to prolong its life with the help of our best plumber in Sydney. Please get in touch with our team for further queries.